Power And Hand Tools
The power tools that are available to electricians today are much smaller than they used to be years ago. Power tools can either be connected to electricity through a cord or they can be cordless. Cordless power tools are preferred more by electricians because they are more convenient and offer mobility while working. These tools use a battery which is charged to produce power.
Hand tools do not use power and are nowadays designed to ensure that injuries to the electrician are minimized while working. Injuries while using hand tools normally occur because there are certain moves that have to be repeated severally.
Basic Tools Used By Electricians
Pliers are a must have for any electrician and the most commonly used are the needle nose and side cutting pliers. Comfort is an important characteristic for any pliers so that the electrician can have a firm grip to enable him carry out his work effectively. A power drill is also a common tool used to drill into concrete or to fasten a fixture. The amount of voltage used on the power drill will depend on what is to be drilled.
Power saws are also commonly used by level 2 electricians in order to cut a variety of items. There are different power saws available such as the spiral saws, the hole saws and the portable band saws.
Identifying The Cause Of The Problem
An electrician cannot fix a problem until he identifies the cause. He therefore will need to use a wire tester in order to know whether there is electricity flowing through the wires. The wire tester will also measure the strength of the electric current and a modern tester will give the electrician a digital reading.
A continuity tester is used to check circuits and fuses which are not working properly. A wire tracer is used to find wires which may be located out of sight such as behind the wall. An electrician can use a multimeter to check the continuity and voltage of the electricity that is flowing through the wires.
Tools That Allow Mobility
A ladder is an important tool for level 2 electricians since they have to reach overhead service lines or climb up to the ceiling. The electrician should use a ladder that is made from material that does not conduct electricity such as wood. He will also need proper lighting when working since he will sometimes have to switch off the power in order to work. If he is working in a dark space, he will need to use a hand held or a head mounted flashlight.
Article Source: https://www.bharatbhasha.com
Article Url: https://www.bharatbhasha.com/finance-and-business.php/492170
Article Added on Friday, January 20, 2017
|Business And Finance >> Top 50 Articles on Business And Finance|
|Category - >|