Free Articles  >>  Business And Finance >>  Page 2362  >> 

Should I Buy a Table Saw or a Radial Arm Saw

? It's true that a table saw and a radial arm saw do a lot of the same things; they perform many of the same applications accurately and reliably. Just like all craftsmen, though, each tool and each machine has a specialty, something it does better than anything else; the table saw and radial arm saw are no exception to this rule.

Among other applications, both saws can rip, and both saws can crosscut. The radial arm saw, however, is the undisputed crosscutting champion limited only by the length of its arm. Similarly, the table saw is an unparalleled ripper limited only by its workable area (which is determined by the size of the blade opening in the saw table). Ultimately, a radial arm saw's specialty is crosscutting, where the table saw specializes in rip cuts.

Despite their similarities, it is surprisingly difficult for one of these saws to replicate the other's specialty. Because, it is generally difficult to keep larger boards (approximately four feet or larger) square to a table saw blade (especially without a sliding panel cutter), it can be pretty darn difficult to perform efficient, accurate crosscuts on a table saw. Likewise, ripping on a radial arm saw is particularly challenging; despite the use of push-sticks or hold-down wheels, operators must still push lumber underneath the motor housing - a task both difficult and dangerous. Rips are additionally challenging with a radial arm saw as, as aforementioned, the rip width is limited by the length of the saw's arm. Also, because the blade's teeth remain in each cut for longer intervals, a radial arm saw has a much greater propensity to overheat during rips in thick wood. It's possible to reduce this overheating by cutting a deep groove into the saw's table-top, but there will still be an excess of saw dust and a high likelihood of overheating (this, of course, is never good for any tool's motor).

Still, both saws are very versatile in the shop. A radial arm saw, though, is far more useful for applications outside of the sawing realm. It can be fitted for overhead routing applications, surface planing, and drum sanding applications as well. Similarly, most table saws can be fitted with a disk sanding attachment. The radial arm saw though, is also particularly great with dadoes and rabbets providing better blade visibility and a better line of sight than that of a table saw.

The radial arm saw may take the prize for max versatility in the shop, but it is also more difficult to work with and generally less accurate. Cuts are more difficult and time consuming to set up, and the saw itself requires a lot more fine-tuning, recalibrating, and realigning to maintain any degree of comparable accuracy.

Of course, both saws are still precision, high-performance woodworking machines, and both are capable of superior accuracy. However, because the radial arm saw requires more complicated assembly and has a cantilevered arm attached to a cantilevered column (which places a lot of stress on the tool's working parts and components), it is a bit more volatile where accuracy is concerned. By virtue of the radial arm saw's design alone, the arm itself poses an accuracy problem almost enticing blade wander and deviation as the arm and its parts wear over time. Similarly, although a table saw is generally heartier in construction, its miter gauge (which may joggle off-mark) may just be its Achilles heel in maintaining optimal accuracy. - It's worth noting here that if your budget precludes you from buying a high quality saw, buying a lower quality table saw is a much better choice than buying a lower quality radial arm saw. Because of the radial arm saw's cantilevered and very complicated construction, its smarter to only invest in a higher quality model.

It is also important for one to consider shop space. A radial arm saw requires far less space to function properly when compared to a table saw. Needing only a few feet of free space to its right and left sides, the radial arm saw can be pushed straight up against a wall. A table saw, on the other hand, is a much bigger machine; it takes up more space and requires more space to function. To use all the features of a table saw, it must be the center of your shop with adequate open space on all four sides of the table.

As with any power tool or woodworking machine, these saws are dangerous to work with. The radial arm saw's blade is perilously exposed above work surfaces and because the blade can swivel and move, it is never in the same place twice. Angled crosscuts can also be especially dangerous as the blade then assumes the same space you might normally keep your hands. The spin direction of radial arm saw's blade also contributes an element of danger sometimes lifting your materials off the saw table during cuts. Similarly, although the table saw's blade is always in the same space, it can sometimes be quite invisible posing a grave threat to your fingers as you work, and although the blade's spinning action is different in a table saw, it can also throw your working materials. Ultimately, it is vitally and inexpressibly important to be safe, careful, cautious, and smart as you work with either of these saws. When neglected or taken for granted in any way, their bite can be far worse than any bark.

In the end, your choice between a table saw or a radial arm saw should ultimately depend on what you need to do with it, and, perhaps more importantly, whether or not you have, have access to, or plan to have a good miter saw. A sliding compound miter saw, which will essentially do everything a radial arm saw will do only with greater accuracy, portability, and a generally better price tag, is really a must-have tool, and is the perfect compliment to a nice table saw. So, if you have a good miter saw, invest in a table saw. If you don't have a good miter saw (although everyone really should), perhaps a radial arm saw is a more universal, more practical choice. NOTE: As miter saw technology continues to grow, the radial arm saw is becoming less and less popular. I, in fact, predict the radial arm saw is approaching the top of the endangered species list much faster than the top of any craftsman's to-purchase list.

About Author Mallory Kramer :

Mallory Kramer is a graduate of the University of UT where she earned her degree in English. Four years ago she joined M&amp;M Tool where her expertise lie in tool parts &amp; web communications. For over 70 years M&amp;M Tool has sought to provide the most professional service to the tool industry with parts, sales, &amp; service to professional grade power tools, parts &amp; machinery. Please visit <a href="" target="_blank"></a> to share in their expertise.

Article Source:
Article Url:

Article Added on Saturday, August 21, 2010
Other Articles by Mallory Kramer

The Beginning of DeWalt a Power Tool Giant
From the time he was a child Raymond E DeWalt watched and learned from his father the intricacies of woodworking and complex construction. Upon leaving school as an adolescent, he continued to follow this path and earned his keep at mills and construction sites as jobs were available. The young DeWalt though, also learned from his father that a life in mill-work was difficult one, and in order to simplify his own life and to capitalize on both the physical and economical expenses of hard...

2 Best Jobsite Table Saws for Heavy Duty Users
Purchasing a jobsite table saw is a serious investment and one that will surely affect you in the long-term. Consequently, finding one that will continually meet your needs as a craftsmen is possibly the most crucial step in the buying process. The most industrial, heavy-duty users clearly require the most high-quality equipment, and, fortunately, in the world of jobsite table saws, there are two that seem to cast shadows over the competition. With commanding power and innovation these saws...

2 Best Jobsite Table Saws for Light Duty Users
Purchasing a jobsite table saw is a significant investment for any degree of craftsmen; the saw that you choose will certainly have long-term effects on your tooling experience. Because of this, finding the table saw that will continually meet your needs as a craftsmen is possibly the most crucial step in the buying process. Most lighter-duty users require a different machine than do most contractors and sometimes it can be difficult to discern between the two degrees. Fortunately, however, in...

Planers and Jointers The Real Differences Between These Woodworking Machines
Aside from their structural differences, even some of the most gifted woodworkers still can't quite put a finger on the precise differences between a planer and a jointer. Others still can't determine which they'd rather be alone with on a deserted island, or which they'd have for their own woodshop if they could choose only one. The fact is, although similar, a planer and a jointer do very different things and both are extremely advantageous in their own different ways. Though both machines...

Tips for Using and Maintaining Woodworking Blades
Woodworkers have a lot to think about before diving into that first cut. Here's a few tips for keeping your saw blades in their most optimal cutting form. Craftsmen often wonder how many teeth to look for in a saw blade, they often deliberate over which tooth-count will deliver the smoothest, cleanest cuts. The answer comes simply once you understand how the saw-blade-tooth system works. As a general rule, the more teeth your saw blade has, the smoother the cut. It's as simple as that. This...

Top 5 Power Tools Everyone Should Own
There are a certain few things that no household should be without - warm beds, a full refrigerator and power tools, to name only a few. Having just a few basic power tools around the house (garage or shop) can simplify nearly every household task. More specifically, there are five life-changing power tools that no homeowner, handyman, or hobbyist should be without. 1. Power Drill Every household on the block should have either a corded or (preferably) cordless power drill on hand. Having a...

Choosing the Right Router
A router is one of the most versatile, and widely used tools on the market today; and for good reason. A router is a woodworking tool designed to rout, or mill out an area in the surface of a piece of wood, and can feasibly perform almost any kind of shaping and wood cutting application. It would be difficult to determine the application in which a router is most commonly used; they dominate edging operations, and are masterfully equip for box joining, mortising, dovetailing, dadoing, and...

Top 2 Industrial Plunge Routers
Industrial craftsmen require a plunge router as strong and determined as they are - for these tough-guys the most high-performance plunge-base routers come from Bosch and Porter-Cable. With the most optimized speed, power, and precision, these routers will surely impress and most certainly help you achieve the most professional, most sought after results. Porter-Cable is known for building some of the most impressive routers in the industry today - their 7539 five-speed plunge router is...

Clipped Head Versus Round Head Framing Nailers
There is much debate in the tool community surrounding both the benefits and short-fallings of clipped head pneumatic framing nailers and full head pneumatic framing nailers. There are craftsman on either side of the fence loyally fighting tooth and nail (pardon the pun) for their preference: clipped heads holler for superior toe nailing and more efficient magazine capacities while full heads bellow for greater strength and holding power and a more polished overall result - and then, of...

Choosing the Best Tile Saw
Each degree of craftsmen requires a different tool to best meet their specific needs; when choosing a tile saw, it is all too critical to ensure you settle down with the right one. For the most industrious users requiring the most rugged tile saws, there are two that bring your tiling projects to a new level of efficient professionalism. MK Diamond builds some of the most superior tile saws in the business coupling experience and innovation to bring craftsmen a tile saw unlike any other...

Click here to see More Articles by Mallory Kramer
Publishers / Webmasters
Article ID: 255054
DELINK URL from Authors Bio
REMOVE Article
Tell A Friend
Leave A Comment!
Download this article in PDF
Report Article!
Search through all the articles:

210 Users Online!!
Related Articles:
Latest Articles:
Business And Finance >> Top 50 Articles on Business And Finance
Category - >
Advertising Advice Affiliate Programs Automobiles
Be Your Own Mentor Careers Communication Consumers
CopyWriting Crime Domain Names DoT com Entrepreneur Corner
Ebooks Ecommerce Education Email
Entertainment Environment Family Finance And Business
Food & Drink Gardening Health & Fitness Hobbies
Home Business Home Improvement Humour House Holds
Internet And Computers Kiddos and Teens Legal Matters Mail Order
Management Marketing Marriage MetaPhysical
Motivational MultiMedia Multi Level Marketing NewsLetters
Pets Psychology Religion Parenting
Politics Sales Science Search Engine Optimization
Site Promotion Sports Technology Travel
Web Development Web Hosting WeightLoss Women's Corner
Writing Miscellaneous Articles Real Estate Arts And Crafts

Disclaimer: The information presented and opinions expressed in the articles are those of the authors
and do not necessarily represent the views of and/or its owners.

Copyright AwareINDIA. All rights reserved || Privacy Policy || Terms Of Use || Author Guidelines || Free Articles
FAQs Link To Us || Submit An Article || Free Downloads|| Contact Us || Site Map  || Advertise with Us ||
Click here for Special webhosting packages for visitors of this website only!
Vastu Shastra

Multi Domain Hosting Provided By AwareIndia

Company IDS