bharatbhasha.com

Click here for Special Web hosting packages for visitors of this website only!

Free Articles  >>  Consumer >>  Page 8  >> 

Selective Conformal Coating as a trend





nnDespite the growing challenges it is facing, Conformal Coating (http://www.rehm-group.com) is becoming more and more important. As printed circuit boards become smaller and smaller, the challenges faced when coating them grow. It is increasingly important that products are protected from damage from moisture, dust and other dirt, as this can lead to interference and even cause the board to fail.

In the protective coating process (Conformal Coating process), printed circuit boards are protected from dust and environmental factors by applying a targeted protective coating, thus ensuring their reliability. Being able to protect electronics is of critical importance in sectors where faultless function is essential.

Theoretically, any assembled circuit board can be coated, although, depending on the plant system, the size of the board and how it is arranged may need to be reviewed beforehand. Because of the very technically complex challenges and the extreme climatic changes involved, protective coating is essential in air and space travel, ship building, automotive engineering and military technology. But this coating is also very useful to protect the function of products with printed circuit boards that come into contact with dirt or other environmental factors. Therefore the coating is used in all branches of the electronics industry, such as alarm technology, telecommunications, industry controls, traffic technology, railway technology, medical engineering, food engineering and many other areas.

To implement the Conformal Coating Line, as well as the coating equipment itself, handling equipment and a drying or annealing oven are also needed. It is important to have a detailed, regulated temperature profile to prevent blistering or other flaws in the surface of the coating material.

The first step in Conformal Coating is choosing the coating material. Several factors must be considered, including the protection required, whether the selected coating can be processed in the line considering its application, drying and cycle time and its cost effectiveness. Popular coatings are epoxy, urethane, silicone and acrylic based. Choosing the right coating requires a lot of experience and technical knowledge and is an almost impossible decision for anyone except an expert. After choosing the right coating materials to fit the mechanical, chemical and electronic requirements of the board, the core Conformal Coating Line process, the coating process itself, can begin. There are different methods for applying the coating on to the board, such as squirting, spraying, dipping, flooding, dispensing and vapour depositing.

As most printed circuit boards contain components that cannot be coated, the modern standard is selective spray coating. Diverse parameters must be considered, as not every coating can be applied with every process. One problem, for example, is that many of the nozzles in selective spraying equipment become clogged quickly, so highly viscose coatings cannot be used and changing coatings can be problematic. Another important factor is the layout of the board, which should be designed for coating beforehand to ensure the most effective and cost-efficient coating. This is because the spaces in very high or tightly packed circuit boards cannot be sprayed with every nozzle. After the protective coating has been applied, the next step is the drying process. This process should take place at a regulated temperature profile so that the results can be reproduced and are reliable. Incorrect temperature profiles or hardening the coating too quickly can lead to several faults, such as blistering, holes or the orange peel effect. It is clear that protective coating is both crucial and complicated.

Because of the complexity and the interaction of the individual parameters and processes, it is vital that the customer agrees on the desired result and the best solution for each end product with the equipment manufacturer and material supplier. It is very complex and one will make sure that this solution is found. Therefore, in addition to the RDS drying plants, Rehm Thermal Systems (http://www.rehm-group.com) as an example now offers a complete coating line as a general contractor. Large companies requiring a wide range of coatings and also producing a large volume need quick reaction times, so it might be more cost-efficient to have the equipment in house to be able to adjust perfectly to market demand.nnFirmenkontakt
Rehm Thermal Systems GmbH
Frau Department Marketing
Leinenstrasse 7
89143 Blaubeuren-Seissen
+49 7344 9606-0
info@APROS-Consulting.com
http://www.rehm-group.com/

Pressekontakt
APROS Int. Consulting & Services
Herr Volker Feyerabend
Rennengaessle 9
72800 Eningen
+49-7121-9809911
info@APROS-Consulting.com
http://www.apros-consulting.com
nnconformal coating, Rehm, Rehm Thermal Systems, pcb, Blaubeuren, Ulm, Leiterplatten, Beschichtungnn
About Author Department Marketing :


Article Source: https://www.bharatbhasha.com
Article Url: https://www.bharatbhasha.com/consumer.php/484794


Article Added on Tuesday, October 21, 2014
LD
Other Articles by Department Marketing

Unprotected is out
Successful Conformal Coating Day at Rehm Thermal SystemsnnA professional protective coating of assemblies extends the life of technical products and increases the quality of electronic devices. Conformal coating is the key to modern and reliable manufacturing, especially in the field of sensitive electronics such as in aviation and space technology, medicine, power electronics and the automotive industry. Together with partners from the industry, Rehm Thermal Systems organised a successful...

Experience the soldering process live at Rehm Thermal Systems
A new Technology Center offers a wide range of possibilitiesnnWhich procedure for soldering, tempering or coating is best suited for which application? How can a specific temperature profile be created? And what technology can be used to reduce voids in the soldered joint? Whether it is competent advice, process demonstration or technical training - as leading manufacturer of thermal system solutions for the electronics and photovoltaics industry, Rehm (http://www.rehm-group.com/) offers a...

Miniaturisation Trends in the Electronics Industry
Rehm Thermal Systems discusses minaturisation with industry partnersnnDoing the most with the least. Hardly visible to the naked eye, bearing names like 03015 or 01005, but the key actors behind unique innovations in the electronics world. Whether a smartphone, tablet or LED lighting, when it comes to manufacturing electronic products all eyes are now on the tiniest SMT components like microchips, capacitors or resistors. They offer new technological solutions and challenge industry to...

Profits and Savings go Hand in Hand
Operational energy management is becoming increasingly importantnnEnergy costs, energy transition, energy efficiency - just a small selection of keywords relating to increasingly important energy issues that we have constantly faced in the recent past. Almost all home appliances are advertised with labels showing their energy efficiency class, because even in private homes, the economical use of energy has a noticeable effect on the household budget. Therefore, how much higher is the savings...

Publishers / Webmasters
Article ID: 484794
DELINK URL from Authors Bio
REMOVE Article
Tell A Friend
Leave A Comment!
Download this article in PDF
Report Article!
Search through all the articles:


264 Users Online!!
Related Articles:
Latest Articles:
 
consumer >> Top 50 Articles on consumer
Category - >
Advertising Advice Affiliate Programs Automobiles
Be Your Own Mentor Careers Communication Consumers
CopyWriting Crime Domain Names DoT com Entrepreneur Corner
Ebooks Ecommerce Education Email
Entertainment Environment Family Finance And Business
Food & Drink Gardening Health & Fitness Hobbies
Home Business Home Improvement Humour House Holds
Internet And Computers Kiddos and Teens Legal Matters Mail Order
Management Marketing Marriage MetaPhysical
Motivational MultiMedia Multi Level Marketing NewsLetters
Pets Psychology Religion Parenting
Politics Sales Science Search Engine Optimization
Site Promotion Sports Technology Travel
Web Development Web Hosting WeightLoss Women's Corner
Writing Miscellaneous Articles Real Estate Arts And Crafts
Aging


Disclaimer: The information presented and opinions expressed in the articles are those of the authors
and do not necessarily represent the views of bharatbhasha.com and/or its owners.


Copyright AwareINDIA. All rights reserved || Privacy Policy || Terms Of Use || Author Guidelines || Free Articles
FAQs Link To Us || Submit An Article || Free Downloads|| Contact Us || Site Map  || Advertise with Us ||
Click here for Special webhosting packages for visitors of this website only!
Vastu Shastra

Linux Reseller Hosting Provided By AwareIndia







Company IDS