bharatbhasha.com

Click here for Special Web hosting packages for visitors of this website only!

Free Articles  >>  Consumer >>  Page 19  >> 

Major Contract for FRIMO





SMP chooses FRIMO for large-scale door panel projectnnThe FRIMO Group is a specialist in technology for lightweight construction solutions and natural fiber processing. The competence centers in Sontra and Freilassing can now look forward to a major project for back-injecting, laminating, punching and edgefolding production equipment used for manufacturing natural fiber door panels. After successful completion of a jointly implemented prototype phase, customer Samvardhana Motherson Peguform (SMP) has placed orders with FRIMO for tooling and systems technology amounting to a total investment of more than ten million euros.

With its innovative technical concepts, the FRIMO Group has qualified as a development and systems partner for a pioneering project by Samvardhana Motherson Peguform (SMP). This includes a technology package for substrate pressing, laminating, punching and edgefolding.

Substrate pressing is carried out using an all-in-one system with tools for manufacturing door panels by back-injecting natural fibers. This allows the originally separate steps of hot pressing semi-finished sheets (e.g. natural fiber mats) and back-injecting to be integrated into a single process. The project also has a global focus, including not only Europe, but China as well. The modules that SMP will receive from FRIMO essentially comprise: a mat magazine, mat aligner, sizing press, mat transporter, forming press, forming tool, component remover, tool changer and a control system for the entire installation.

The double design of the mat magazine allows materials to be changed without interruption. Material or version changes are possible while production is ongoing. A flexible robot solution is used for mat alignment; this also has a positive impact on system availability. The sizing press is designed to ensure that a precise sizing thickness is maintained across the entire product. Quick, short-term adjustments of the surface weight are also possible. Energy efficiency and reliability were important features in the technical design of the sizing press. Adjustment to the tools, minimal waste and top speed tool changes were crucial in the forming press design. The system is centrally controlled, with the option of using a mobile unit.

The project scope also includes complete laminating, punching and edge-folding technology. Here, the FRIMO specialists convinced the customer with an innovative "full flex" laminating system concept that allows fast tool changes. In addition, the recently developed FRIMO advanced cooling system (FACS) enables the film to be cooled further with the same expected cooling time, resulting in a superior initial adhesive bond. SMP opted for a combined edgefolding and punching concept which can also produce different component variants without tool changes, allowing the customer to make significant savings in terms of handling. At the same time, this multifunctional inline system also saves energy as it is equipped with the Smart Energy heating system.

After the successful prototype phase, SMP expects that commissioning an all-in-one substrate pressing, laminating, punching and edgefolding package will be beneficial for designing standard tools and systems. This was an important aspect in commissioning the serial equipment. FRIMO is responsible for precisely coordinating the interfaces between the tooling and systems technology. In addition to this, FRIMO will also carry out integration and project management for any additional scope included in the project by SMP, e.g. injection units including material supply and peripherals. Further benefits include the combined single step forming and back-injecting process and the sustainable manufacturing concept in terms of material and energy consumption, as well as significantly optimized space requirements.

The FRIMO Group has already demonstrated its expertise in the field of NFPP manufacturing and processes in a number of completed reference projects. Both SMP and FRIMO feel that this joint project aimed at back-injecting natural fiber door panels offers a great deal of potential for future applications.
nnKontakt:
FRIMO Group GmbH
Martina Schierholt
Hansaring 1
49504 Lotte
+49 (0)5404 886-157
schierholt.m@frimo.com
http://www.frimo.com
nnlightweight construction solutions,natural fiber processing,natural fiber door panels,substrate pressing,NFPP processing,laminating,punching,edgefolding,frimonn
About Author Martina Schierholt :


Article Source: https://www.bharatbhasha.com
Article Url: https://www.bharatbhasha.com/consumer.php/452845


Article Added on Sunday, May 4, 2014
LD
Other Articles by Martina Schierholt

The automotive industry visits Freilassing
250 visitors for the FRIMO TechDaynnLOTTE / FREILASSIG October, 2014 - Under the motto Technology trends and innovations the FRIMO Group invited its customers and business partners to the Freilassing TechDay on September 25, 2014. Almost 250 participants from more than 50 different companies and 14 countries of origin came along, to get the latest insights into topics including surfaces, thermoforming, laminating and edgefolding. Peter Rajsp, FRIMO plant manager in Freilassing, was pleased with...

FRIMO and CMTT agree Joint Venture in the Mixing Heads field
Accelerate development - extend performance range - optimize service December 2014 - Over more than half a century, FRIMO has left an indelible mark on the manufacture of polyurethane parts for vehicle interiors, particularly instrument panels, door trims and center consoles. Whats more, it took the company just eight years to propel itself into dosing and mixing technology as one of the Top 5 global companies in this field. In fact, since 2006, FRIMO has independently constructed mixing and...

LESLIE takes off
New lightweight construction solutions for large-scale series production from FRIMO and 3D|CORE nnLotte/Herford September 2013 - In conjunction with Composites Europe, which was hold from 17-19 September 2013 in Stuttgart, the FRIMO Group GmbH with its headquarters in Lotte and ESC GmbH & Co. KG based in Herford announced their partnership in the development of cost-effective lightweight construction solutions for series production. Hans-Günter Bayer, CEO of FRIMO Group, and Fritz M....

Well combined and Economically Optimized Punching and Edgefolding in a Single Step
Lotte/Sontra, September 2014nnFor economically viable production of high-quality plastics and lightweight components, the market demands innovative manufacturing solutions: processes must be accelerated, resources saved and costs saved at the same time - both in the initial investment and in ongoing production. FRIMO is the leading market specialist when efficient production solutions are involved, and can offer nearly all technologies that are used to manufacture plastic components. When...

FRIMO at JEC Europe 2014
Lightweight construction solutions - tailor made, sophisticated and field-tested nnAt JEC Europe 2014, the only trade fair which brings together the global composite industry, FRIMO will once again present an extensive range of manufacturing solutions for composites. From March 11 to 13, the company will be in Paris to demonstrate its expertise in fields ranging from RTM (epoxy or PUR) and processing organo-sheets to natural fiber PP applications. Next to Composites Europe, this is the most...

FRIMO HIGHSPEED Infrared Welding
High welding seam strength and absolutely no particlesnnFor some years now, infrared welding has been gaining significance as compared with hot gas welding and established processes such as hot plate welding and vibration welding. FRIMO is a leading provider of infrared welding systems and has developed this technology to series-ready status for a number of applications. Contactless infrared welding of plastics has numerous advantages and is suitable for both small and large components right...

FRIMO at COMPOSITES EUROPE 2014
Lightweight construction solutions - customized, perfected, put to the testnnFrom October 7th to the 9th FRIMO, together with cooperation partner Schuler, will be presenting a broad spectrum of manufacturing solutions as part of Composites Europe 2014 in Düsseldorf. In hall 8b/A45, FRIMO will be showcasing for professional visitors its expertise ranging from the processing of thermoplastic organo sheets to RTM (epoxy or PU) through to natural fiber PP applications. When it comes to the...

FRIMO presented innovations in plastics joining thermoforming and PU processing at the Fakuma
October 2014 - under the motto “Ensure Quality - Increase Productivity”, the FRIMO Group presented the latest developments around plastics joining, thermoforming, and PU processing technologies as part of the FAKUMA trade fair show in FriedrichshafennnPlastics joining - New IR welding machine with new camera control system FRIMO has added two new design sizes to its portfolio of standardized infrared welding systems in the JoinLine IR welding machine series. In addition to the...

Publishers / Webmasters
Article ID: 452845
DELINK URL from Authors Bio
REMOVE Article
Tell A Friend
Leave A Comment!
Download this article in PDF
Report Article!
Search through all the articles:


264 Users Online!!
Related Articles:
Latest Articles:
 
consumer >> Top 50 Articles on consumer
Category - >
Advertising Advice Affiliate Programs Automobiles
Be Your Own Mentor Careers Communication Consumers
CopyWriting Crime Domain Names DoT com Entrepreneur Corner
Ebooks Ecommerce Education Email
Entertainment Environment Family Finance And Business
Food & Drink Gardening Health & Fitness Hobbies
Home Business Home Improvement Humour House Holds
Internet And Computers Kiddos and Teens Legal Matters Mail Order
Management Marketing Marriage MetaPhysical
Motivational MultiMedia Multi Level Marketing NewsLetters
Pets Psychology Religion Parenting
Politics Sales Science Search Engine Optimization
Site Promotion Sports Technology Travel
Web Development Web Hosting WeightLoss Women's Corner
Writing Miscellaneous Articles Real Estate Arts And Crafts
Aging


Disclaimer: The information presented and opinions expressed in the articles are those of the authors
and do not necessarily represent the views of bharatbhasha.com and/or its owners.


Copyright AwareINDIA. All rights reserved || Privacy Policy || Terms Of Use || Author Guidelines || Free Articles
FAQs Link To Us || Submit An Article || Free Downloads|| Contact Us || Site Map  || Advertise with Us ||
Click here for Special webhosting packages for visitors of this website only!
Vastu Shastra

Bulk Mailing Solution Provided By AwareIndia







Company IDS