The Cork Tiles Installation Process
One should first evaluate the area of installation and hence determine whether the area is good enough or not. For instance, areas that have very wet sub floors should be avoided when installing these types of floors. From hence, one must make sure that the areas are well leveled so that the tiles will look elegant at the end of the installation. The concrete floors should be smooth, dust free, and completely dry. One must also be careful to follow the manufacture’s instructions when it comes to installation process.
• The installation stage
When one begins the process of installing the cork tile floors, they should start from the center to the rest of the room. Proper measurements should be done in this stage. This way, one can determine the pattern to follow while installing the tiles on the rest of the space.
One may opt to use glue to install cork tiles. However, some tile experts have a way of installing cork tiles without necessarily having to use glue or adhesive. If you were to use glue, contact cement is recommended. The adhesive should be applied correctly and removed from the places where it is not required.
Once the adhesive is dry, tiles are placed on the floor and pressed hard so that they remain intact. The tiles should be well aligned so that they look neat at the end of installation. After a day or so, the pedestrians are allowed into the room so that the tiles remain completely firm on the floor’s surface.
Varnishing can be done so that the appearance is improved, and that it also helps in sealing joints. In the end, the floor is cleaned and vacuumed. The only maintenance required in cork tiles in vacuuming and cleaning with damp cloth.
The Floating Cork Floors
With time, people are opting for floating cork floors. This way of flooring is less engaging in contrast to the method described above. In this case, the floor floats on sub floors. There is not needed to do much preparation on the subfloor. Actually, one can even install the cork floor on wet areas such as the kitchen and the bathroom. Moisture barriers will be used so that the floated floor is not damaged by the subfloor’s humidity.
Doing Flooring In the Right Way
Regardless of the choice that you make on cork flooring, one needs to ensure that the flooring is done in the right way. The floor should improve the general look of a home or any other space. It is therefore, important to consult the experts and does proper research on these types of floors. One also needs to compare prices and choose flooring that is within their budget.
Article Source: http://www.bharatbhasha.com
Article Url: http://www.bharatbhasha.com/home_improvement.php/486336
Article Added on Friday, December 12, 2014
|home improvement >> Top 50 Articles on Home Improvement|
|Category - >|